Making a homemade electric hydraulic press is one of the most fulfilling things you can do with your free time. The good thing is you don’t need a lot of things to make these machines. In fact, most of the materials and parts you need are all around you. In this guide, we are going to provide you with tips on how you can make your own hydraulic press attachments:
One of the things you need to understand about the homemade electric hydraulic press is that the process of making it is still the same as the manual one. You still need the car jack as the action cylinder, only that this time is controlled by a solenoid. But you can also buy a new action cylinder for better efficiency. Here are the steps that make a homemade electric hydraulic press:
Construct the Stand
The construction of the stand takes a number of things. One of them is the base of the stand that should string enough to handle the expected loads. Among the key things that you need to consider is the stability of the base and the materials that you need to have. The rectangular tubes are highly recommended for the base.
The next thing should be the construction of the arms. Depending on the height of the machine you want to make, you need to get the arm height correct. Still, the use of rectangular metal tubes is highly recommended for the arms. They must also be very strong to hand the ton you want to produce.
Now you can work on the upper part of the frame or the top plate, which the section when you will place the jack or the action cylinders. The surface should be large enough to accommodate the solenoid and all other components.
Connect The Jack To Solenoid
This is the trickiest part of the whole process. If you are using a car jack, you need to automate the cranking process using a solenoid. You need to do a lot of modifications to ensure the solenoid is producing the required. Make a home on the upper part for the jack to press the required material.
If you have bought an actual hydraulic cylinder, you need to consider a more complex system that you can buy and install direct. It will be a bit expensive, will be fast to make, and the hydraulic press will be more efficient.